This intake pipe is for swapping a 6.4L hemi intake manifold onto your 5.7L hemi in a 5th gen (2019+) Ram 1500.
Part of this swap is that the throttle body changes location. The traditional solution is to install an aftermarket pod filter. But pod filters do not filter as well, require frequent cleaning, and are often poorly designed so they are taking in hot engine air. The options on the market that are well designed around these problems are very expensive.
This intake pipe lets you retain your factory air filter box, IAT sensor, and crankcase ventilation connections. Keep all the goodness of OEM engineering while still getting the torque bump from the 6.4 intake manifold!
Fabricated from Nylon (PA6-GF), this intake is very oil and chemical resistant. It is also rated for temperatures up to 186C / 367F.
NOTE: To install this you will also need a 3.5” and a 4” silicone coupler with the corresponding hose clamps. I can provide these but they’ll be cheaper if you buy them for yourself.
This intake pipe is for swapping a 6.4L hemi intake manifold onto your 5.7L hemi in a 5th gen (2019+) Ram 1500.
Part of this swap is that the throttle body changes location. The traditional solution is to install an aftermarket pod filter. But pod filters do not filter as well, require frequent cleaning, and are often poorly designed so they are taking in hot engine air. The options on the market that are well designed around these problems are very expensive.
This intake pipe lets you retain your factory air filter box, IAT sensor, and crankcase ventilation connections. Keep all the goodness of OEM engineering while still getting the torque bump from the 6.4 intake manifold!
Fabricated from Nylon (PA6-GF), this intake is very oil and chemical resistant. It is also rated for temperatures up to 186C / 367F.
NOTE: To install this you will also need a 3.5” and a 4” silicone coupler with the corresponding hose clamps. I can provide these but they’ll be cheaper if you buy them for yourself.